{ "currentVersion": 10.81, "serviceDescription": "Locations of 3D seismic volumes in south Louisiana available for license through three vendors: Seismic Exchange Inc., Seitel Inc., Schlumberger. In addition, a polygon intended to highlight where 3D seismic is not available was also prepared. Data is available across the state, this layer consists of results from LTRC project 18-3GT and Tran-SET Project No. 17GTLSU12 covering southeast Louisiana within the study area bounds. \nPolygons showing locations of 3D seismic data available in south Louisiana. Attribute tables include survey names and other information. Several layers depict seismic surveys by vendor - with polygons either outlined or filled, and a single composite layer combines the footprint of all the surveys (3D Data Filled Composite). 3D seismic is widely available in south Louisiana but some areas do not have seismic available - these areas are identified with the 3D_Seismic_Data_Gap\nSEI layers\nFIlled polygons showing location of 3D data volumes available from Seismic Exchange Incorporated as of early 2018, New Orleans and Houston. Volumes were acquired at different times and with different acquisition and processing parameters, and some have been reprocessed and merged. Data was acquired for energy industry applications and have use in studies like this one as a guideline to subsurface faulting patterns that may extend to the surface, or which may have influence on near-surface processes.\nSLB layers\nFIlled polygons showing location of 3D data volumes available from Schlumberger, Houston, as of early 2018. Volumes were acquired at different times and with different acquisition and processing parameters, and some have been reprocessed and merged. Data was acquired for energy industry applications and have use in studies like this one as a guideline to subsurface faulting patterns that may extend to the surface, or which may have influence on near-surface processes.\nComposite layer\nSingle color filled composite polygon indicating location of 3D data volumes available as of early 2018 from Seismic Exchange Incorporated, Seitel, and Schlumberger, New Orleans and Houston. Data volumes were acquired at different times and with different acquisition and processing parameters, and some have been reprocessed and merged. Data was acquired for energy industry applications and have use in studies like this one as a guide to subsurface faulting patterns that may extend to the surface, or which may have influence on near-surface processes.\nData Gap layer\nFilled polygon composited from 3D data volume outlines compiled for this study. Gap is drawn based on areas between 3D seismic volume footprints. ", "mapName": "Layers", "description": "", "copyrightText": "https://www.multiclient.slb.com/interactive_map/MCDLMain.html ; https://seitel.com/index.php/2017/02/14/survey-shape-files/ ; https://www.seismicexchange.com/seismic_library/3d_regional_and_specialized_maps", "supportsDynamicLayers": true, "layers": [ { "id": 0, "name": "Study Area Outline", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 1, "name": "SEI_3D_Clip", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 2, "name": "SEITEL_3D_Clip", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 3, "name": "SLB_3D_Clip", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 4, "name": "SEI_3D_Clip Outlined", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 5, "name": "SLB_3D_Clip Outlined", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 6, "name": "SEITEL_3D_Clip Outlined", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 7, "name": "3D_Data_Filled_Composite", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 8, "name": "3D_Seismic_Data_Gap", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" } ], "tables": [], "spatialReference": { "wkid": 26915, "latestWkid": 26915 }, "singleFusedMapCache": false, "initialExtent": { "xmin": 580706.6681125251, "ymin": 3270284.206301245, "xmax": 919908.2761874745, "ymax": 3406482.355452005, "spatialReference": { "wkid": 26915, "latestWkid": 26915 } }, "fullExtent": { "xmin": 632157.8766000001, "ymin": 3219116.0012999997, "xmax": 868457.0676999995, "ymax": 3386140.6514, "spatialReference": { "wkid": 26915, "latestWkid": 26915 } }, "minScale": 0, "maxScale": 0, "units": "esriMeters", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "", "Author": "The data available, including all Geographic Information Systems data, maps, tables, numbers, graphics, and text (hereinafter collectively referred to as the \"Information\"), is provided on an \"As Is\", \"As Available\" and \"With All Faults\" basis. Neither the authors of this research study The Culpepper Group, LLC nor any of its officials, employees, consultants or contractors (hereinafter collectively referred to as \"The Culpepper Group\") make any warranty of any kind for this information, express or implied, including but not limited to any warranties of merchantability or fitness for a particular purpose, nor shall the distribution of this information constitute any warranty. The spatial data research results/interpretations reflect the view of the research author(s) who is (are) responsible for the facts and the accuracy of the data presented herein. The spatial data research results/interpretations do not necessarily reflect the official views or policies of the Louisiana Transportation Research Center, the Louisiana Department of Transportation and Development, or the Federal Highway Administration (FHWA funded only). These spatial data research results do not constitute a standard, specification, or regulation. These spatial data research results do not represent a legal survey.", "Comments": "Locations of 3D seismic volumes in south Louisiana available for license through three vendors: Seismic Exchange Inc., Seitel Inc., Schlumberger. In addition, a polygon intended to highlight where 3D seismic is not available was also prepared. Data is available across the state, this layer consists of results from LTRC project 18-3GT and Tran-SET Project No. 17GTLSU12 covering southeast Louisiana within the study area bounds. \nPolygons showing locations of 3D seismic data available in south Louisiana. Attribute tables include survey names and other information. Several layers depict seismic surveys by vendor - with polygons either outlined or filled, and a single composite layer combines the footprint of all the surveys (3D Data Filled Composite). 3D seismic is widely available in south Louisiana but some areas do not have seismic available - these areas are identified with the 3D_Seismic_Data_Gap\nSEI layers\nFIlled polygons showing location of 3D data volumes available from Seismic Exchange Incorporated as of early 2018, New Orleans and Houston. Volumes were acquired at different times and with different acquisition and processing parameters, and some have been reprocessed and merged. Data was acquired for energy industry applications and have use in studies like this one as a guideline to subsurface faulting patterns that may extend to the surface, or which may have influence on near-surface processes.\nSLB layers\nFIlled polygons showing location of 3D data volumes available from Schlumberger, Houston, as of early 2018. Volumes were acquired at different times and with different acquisition and processing parameters, and some have been reprocessed and merged. Data was acquired for energy industry applications and have use in studies like this one as a guideline to subsurface faulting patterns that may extend to the surface, or which may have influence on near-surface processes.\nComposite layer\nSingle color filled composite polygon indicating location of 3D data volumes available as of early 2018 from Seismic Exchange Incorporated, Seitel, and Schlumberger, New Orleans and Houston. Data volumes were acquired at different times and with different acquisition and processing parameters, and some have been reprocessed and merged. Data was acquired for energy industry applications and have use in studies like this one as a guide to subsurface faulting patterns that may extend to the surface, or which may have influence on near-surface processes.\nData Gap layer\nFilled polygon composited from 3D data volume outlines compiled for this study. Gap is drawn based on areas between 3D seismic volume footprints. ", "Subject": "Southeast Louisiana 3D seismic data spatially located as research results from LTRC project 18-3GT and Tran-SET Project No. 17GTLSU12.", "Category": "", "AntialiasingMode": "None", "TextAntialiasingMode": "Force", "Keywords": "LTRC,Active Faults,South Louisiana,Neotectonics,Seismic" }, "capabilities": "Map,Query,Data", "supportedQueryFormats": "JSON, geoJSON", "exportTilesAllowed": false, "referenceScale": 0, "supportsDatumTransformation": true, "maxRecordCount": 1000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "KmlServer", "serviceItemId": "7d969d64bcde42258ee5a2f1fd22ee43" }